Noria Corporation    forums.noria.com    Message Boards  Hop To Forum Categories  Alignment/Balancing/Vibration    high level horizental vibration
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Gold Member - 25 or more posts
Posted
hello every one;

I have many reciprocating pump "PMH" supplied by electric motors(45kw) "ABB" ( belt transmission).

I level of horizental vibration on the NDE motor nearing is 9.63 and 10.59 mm/s RMS on DE bearing. the spectum used to show the frequency 45hz, and there attached levels and frequencies of bearings vibration.


many thanks for every one could have a participation of dignosis.
 
Posts: 31 | Registered: Fri October 14 2005Reply With QuoteEdit or Delete MessageReport This Post
Gold Member - 25 or more posts
Posted Hide Post
Level (mm/s RMS) frequency(hz)
NDE vertical:
level: 2.86
frequencies: 2.30@30
NDE horizental:
level: 9.63
frequencies: .36@32.5, 9.35@45, 1.73@60
DE vertical:
level: 2.48
frequencies: .51@15, 1.44@30, .5@45, 1.10@60, .95@90, .19@122.5
DE horizental:
level: 10.59
frequencies: .64@30, 9.95@45, .64@60
DE axial:
level: 4.2
frequencies: 4.14@30, .38@60
 
Posts: 31 | Registered: Fri October 14 2005Reply With QuoteEdit or Delete MessageReport This Post
Bronze Member - 1 or more posts
Posted Hide Post
quote:
Originally posted by motorist:
hello every one;

I have many reciprocating pump "PMH" supplied by electric motors(45kw) "ABB" ( belt transmission).

I level of horizental vibration on the NDE motor nearing is 9.63 and 10.59 mm/s RMS on DE bearing. the spectum used to show the frequency 45hz, and there attached levels and frequencies of bearings vibration.


many thanks for every one could have a participation of dignosis.
 
Posts: 2 | Registered: Fri March 24 2006Reply With QuoteEdit or Delete MessageReport This Post
Bronze Member - 1 or more posts
Posted Hide Post
What is the working speed of that pump?
What are the vertical ampplite vibration and frequence?
How many piston have the pump?

Regards.

Rui Carvalho
 
Posts: 2 | Registered: Fri March 24 2006Reply With QuoteEdit or Delete MessageReport This Post
Gold Member - 25 or more posts
Posted Hide Post
the working speed of motor is 1480rpm
the frequencies and levels of Vertical Horizontal ,and Axial(on motor) is abouve.

(the speed of the pump is not known)
 
Posts: 31 | Registered: Fri October 14 2005Reply With QuoteEdit or Delete MessageReport This Post
Gold Member - 25 or more posts
Posted Hide Post
the pump has 3 pistons
the diameter of the pulley of pump is 638 mm
the diameter of the pulley of motor is 140 mm

the speed of motor is 1480 rpm
 
Posts: 31 | Registered: Fri October 14 2005Reply With QuoteEdit or Delete MessageReport This Post
Gold Member - 25 or more posts
Posted Hide Post
the pump has been soped, the alignment has been controled and corrected. the vibration level is about 3 to 4.5 mm RMS.

(but in another site the level is about 2 to 3 mm RMS.)


thanks for every one and many thanks for Rui Carvalho
 
Posts: 31 | Registered: Fri October 14 2005Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

Noria Corporation    forums.noria.com    Message Boards  Hop To Forum Categories  Alignment/Balancing/Vibration    high level horizental vibration


© 2006 Noria Corporation. All Rights Reserved.
Guidelines and Terms

Go to our old message boards.