Noria Corporation    forums.noria.com    Message Boards  Hop To Forum Categories  Troubleshooting Machine Failures    international 240 3 pt hitch problem
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Bronze Member - 1 or more posts
Posted
A buddy of mine has a international 240 and the 3 pt hitch only raises about 1 inch off the ground when we hook up a box blade. Do we have air in a line or something? Please help, thanks.
 
Posts: 1 | Registered: Tue May 31 2005Reply With QuoteEdit or Delete MessageReport This Post
Bronze Member - 1 or more posts
Posted Hide Post
Well I don't know about the International, but I've seen a Massey 135 that had a filter noone knew existed, so it had never been replaced.

The tractor beeing over 40 years old, the gauze filter had degraded and was sending bits into the system, with the consequence that the hydraulics were choppy. Sometimes you'd loose the steering for a bit...

The folks at Yesterday's tractors forums explained to us that accessing the filter on the 135 requires the removal of some parts in the transmission, and the unless you have a manual or know how they go, you're likely to replace something not quite right and then break something when trying to run the tractor. Flushing the system helped quite a bit.

Yesterday's tractors is a website devoted to this kinda stuff. They helped with the International 27 baler, too.
 
Posts: 1 | Location: Sainte-Foy, Québec, Canada | Registered: Tue February 28 2006Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

Noria Corporation    forums.noria.com    Message Boards  Hop To Forum Categories  Troubleshooting Machine Failures    international 240 3 pt hitch problem


© 2006 Noria Corporation. All Rights Reserved.
Guidelines and Terms

Go to our old message boards.