Skip to main content

Read our primer articles on Grease Guns and Oil Sight Glasses.

Replies sorted oldest to newest

Hello, Feam.

I would like to add that it is NOT wise mix different brands of lubes, if you are going to mix an ISO VG 32 with an ISO VG 46, the lubes must be the same brand, altough rare, there is the chance that different brands cause problems due to incompatibilities in the additives.
Regarding viscosity increase, Mike has cleared better than i could.
Thanks for info , it is is two different brands.
catterpillar brand is in there now i will top off (maybe 40% ) with local castrol .
Machine calls for varying viscosity for working temps so thats not a problem i never work in winter. Should i drain system and put all new? If i drain do i hve to clean with something?
its a 30 gal system. Thanks for all the help.
Post
×
×
×
×
Link copied to your clipboard.
×