Hi Every body.
Can any one from the board let me know the way to remove water from used marine oil by using certain chemicals.
Thanks and regards

Raihan

Hi Raihan, why wouldn't you just use centrifugation? How low a water concentration do you want to go (ppm)?

HI JOHN
Water is around 15-20%, Want to lower it upto 5-8%,but without using centrifuge or evaporation, as i mentioned before through chemical means.

quote:

Originally posted by RAIHAN:
HI JOHN
Water is around 15-20%, Want to lower it upto 5-8%,but without using centrifuge or evaporation, as i mentioned before through chemical means.

You need a product like the former Exxon Breaxit (emulsion breaker chemical).

Thanks too much Mr Hughes

I am ignorant about this. From where to get this, and what is the chemical name for this.

And also have you any idea about DEMULSIFIER BR, and its availability.

Thanks and regards

This message has been edited. Last edited by: RAIHAN,

Hi Raihan,

Not sure if you are still researching this - I can help you. We run a successful business and have direct experience in removing all water and contaminants to less than 1 micron, from oil and diesel in marine applications. This is a cost effective process and does not include the use chemicals or centrifuge.

Contact me with your requirements and we will see if we ca be helpful.
Regards
Shirley-ann

quote:

Originally posted by Shirl12:
Hi Raihan,

Not sure if you are still researching this - I can help you. We run a successful business and have direct experience in removing all water and contaminants to less than 1 micron, from oil and diesel in marine applications. This is a cost effective process and does not include the use chemicals or centrifuge.

Contact me with your requirements and we will see if we ca be helpful.
Regards
Shirley-ann

HI SHIRL ONLY INTERESRED TO REMOVE WATER, HOW CAN HELP REGARDING THIS.

THANKS

RAIHAN

Please go through the website of our principals M/s Hilliard Corporation,USA - www.hilliardcorp.com , you will find the various level of filtration system for removal of water from the various used oils of flued,

We are based in india also note down our address and contact details.
Kemtech International Private Ltd.

(AN ISO 9001:2000 Certified Company)

505-506 Red Rose Building, 49-50 Nehru Place

New Delhi - 110 019 (INDIA)

Ph: +91-11-41881341, Fax: +91-11-26468345
E-Mail: sabraham@kemtechinternational.com