The concept of agglomerating particles through an electric field was first developed in Japan in the mid-1970’s. A high DC charge was passed through the oil, quickly agglomerating the particles and significantly improving the efficiency of filters. Particle agglomeration often occurs when energy is imparted onto fluid, but quickly dissipates when the energy source disappears. Since a high charge was used, the oils became very clean, very quickly. Although this technology was patented, a commercial product was never developed because the scientists could not figure out a method to safely do this to oil without a chance of additional problems occurring. The applied charge remained on the particles to keep them combined together well after the fluid passed over the electrodes. This creates a host of potential problems, such as erratic, unpredictable particle agglomeration in unwanted areas of the lubrication system, or accelerated oil oxidation. Of even greater concern is a release of the accumulated charges in the form of a spark causing safety issues.
"Balanced Charged Agglomeration" is not a science definition but a marketing term. Although it is foreseeable that this technology could be applied in a range of other markets, I believe that significantly more research needs to be done on the technology before it can safely be applied to lubricants.
Before you purchase the technology, read some independent scientific papers and consult with your oil supplier.
