Skip to main content

Reply to "Synlube viscosity?"

quote:
Originally posted by Taterandnoodles:
Per the synlube PDS bruce tested both samples using the same standard used by synlube.
----------------------------------------------------------------------------------------
SynLube Lube-4-Life® INITIAL FILL - Motor Oil (Universal Version)

GENERAL INFORMATION
Physical State: Viscous Liquid
Color: Opaque Black
Odor: Characteristic
Odor Threshold: N/D

Viscosity, ASTM D 445
cSt @ 40º C; (mm2/sec) 100.4
cSt @ 100º C; (mm2/sec) 17.55


HTHS Viscosity, mPa•s @ 150ºC, ASTM D 4683 5.0
Viscosity Index 201
SAE Viscosity (J300) 5W-50
ISO Viscosity 100
MRV at -35ºC 27,653
Viscosity Index 201
SAE Viscosity 5W-50
ISO Viscosity 100


Sulfated Ash, wt%, ASTM D 874 0.02
Phosphorous PPM 1000

Pour Point, ºC, -45
Boiling Point, ºC, 316
Flash Point, ºC, ASTM D 92 275.8



Density @15º C kg/l, ASTM D 4052 0.926
Vapor Density (Air = 1): > 2 at 101 kPa
Vapor Pressure: at 20°C < 0.013 kPa (0.1 mm Hg)
Total Base Number (TBN) 11.8
Solubility in Water: Negligible



Here it is again....Universal,not initial fill.
×
×
×
×