ATF Dexron specs

I couldn't find info on the specs you requested. Are the below the ATF fluid type properties you are looking for?

All of the following are chemical synthetic fluids:

http://www.amsoil.com/storefront/tbi.aspx?zo=1181889 .
Denison HF-0, HF-1, HF-2
Viscometrics 100°C, cSt - ASTM D-445 7.3
Viscometrics 40°C, cSt - ASTM D-445 40.1
Viscosity Index (VI) - ASTM D-2270 149
Flash Point °C (°F) - ASTM D-92 256°C (493°F)
Fire Point °C (°F) - ASTM D-92 282°C (540°F)
Pour Point °C (°F) - ASTM D-97 -56°C (-69°F)

http://www.amsoil.com/lit/g28.pdf?zo=1181889 .
• ABEX/Denison - HF-0, HF-1, HF-1A, HF-2, HF-2A
Kinematic Viscosity @ 100°C, cST (ASTM D-445) 9.3
Kinematic Viscosity @ 40°C, cST (ASTM D-445) 50.1
Viscosity Index (ASTM D-2270)...........................171
Flash Point °C (°F) (ASTM D-92) ...............230 (446)
Fire Point °C (°F) (ASTM D-92) ..................242 (468)
Pour Point °C (°F) (ASTM D-97) ..................-40 (-40)

http://www.amsoil.com/storefront/stm.aspx?zo=1181889 .
Denison HF-0, HF-1, HF-2
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) 7.3
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) 32.1
Viscosity Index (ASTM D-2270) 205
Pour Point, °C [°F] (ASTM D-92) -48 [-54]
Flash Point, °C [°F] 202 [396]
Fire Point, °C [°F] 217 [423]

http://www.amsoil.com/storefront/stl.aspx?zo=1181889 .
Denison HF-0, HF-1, HF-2
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) 4.4
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) 15.7
Viscosity Index (ASTM D-2270) 210
Pour Point, °C [°F] (ASTM D-92) -54 [-60]
Flash Point, °C [°F] 175 [347]
Fire Point, °C [°F] 192 [378]

http://www.amsoil.com/storefront/aw.aspx?zo=1181889 .
Denison HF-0, HF-1 and HF-2
Synthetic AW Series
Antiwear Hydraulic Oils

AWF
ISO 15 ISO 22 ISO 32 ISO 46 ISO 68 ISO VG - ASTM D-2422 15 22 32 46 68
VK 100°C cSt - ASTM D-445 4.4 5.9 7.3 9.7 12.3
VK 40°C cSt - ASTM D-445 14.8 20.7 32.0 48.0 67.3
Viscosity Index - ASTM D-2270 237 256 205 192 184
SpGr - g/ml - ASTM D-1298 0.8229 0.8363 0.8408 0.8483 0.8514
Density - lb/gal - ASTM D-1298 6.910 6.964 7.001 7.063 7.089
Flash Point °C (°F) - ASTM D-92 172 (341) 174 (345) 228 (442) 230 (446) 237 (459)
Fire Point °C (°F) - ASTM D-92 184 (363) 188 (370) 248 (478) 254 (489) 256 (493)
Pour Point °C (°F) - ASTM D-97 <-60 (<-76) <-60 (<-76) <-51 (<-60) <-47 (<-53) <-45 (<-49)

http://www.amsoil.com/lit/data...g1255.pdf?zo=1181889 .
Denison HF-0, HF-1 and HF-2
ISO VG — ASTM D-2422 ISO 15 ISO 22 ISO 32 ISO 46 ISO 68 ISO 100 ISO 150 ISO 220 ISO 320 ISO 460 ISO 680 ISO 1000
VK 100°C — ASTM D-445 3.6 4.7 6.2 7.6 10.3 13.6 19.4 25.6 33.8 44.5 59.9 79.8
VK 40°C — ASTM D-445 15.1 22.1 33.1 43.7 67.8 100.5 154.9 226.6 330.3 470.9 705.6 1030.4
Viscosity Index ASTM D-2270 123 130 137 142 138 136 144 144 144 148 150 154
Flash Point °C (°F) ASTM D-92 209 (408) 237 (459) 264 (507) 257 (495) 258 (496) 264 (507) 274 (525) 276 (529) 276 (529) 281 (538) 284 (543) 278 (532)
Fire Point °C (°F) ASTM D-92 227 (441) 265 (509) 278 (532) 272 (522) 274 (525) 276 (529) 296 (565) 296 (565) 300 (572) 302 (576) 296 (565) 298 (568)
Pour Point °C (°F) ASTM D-97 -68 (-90) -68 (-90) -53 (-63) -50 (-58) -48 (-54) -45 (-49) -40 (-40) -40 (-40) -36 (-33) -30 (-22) -28 (-18) -23 (-9)

Also have ATF that meet: Automatic Transmissions
GENERAL MOTORS DEXRON IIIH • GM DEXRON® III‐H, for 2005 and older vehicles originally calling for DEXRON®,
DEXRON® II & III transmission fluids
http://www.amsoil.com/StoreFront/atf.aspx?zo=1181889 .
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) 7.6
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) 38.9
Viscosity Index (ASTM D-2270) 168
Flash Point °C (°F) (ASTM D-92) 234 (453)
Pour Point °C (°F) (ASTM D-97) -53 (-63)

http://www.amsoil.com/StoreFront/atd.aspx?zo=1181889
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) 7.41 7.36
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) 37.14 37.29
Brookfield Viscosity @ -40°C (cP)8411 8400
Flash Point °C (°F) (ASTM D 92) 230 (446) 232 (450)
Pour Point °C (°F) (ASTM D 97) -55 (-67) -55 (-67)

DEXRON VI (DEXRON® VI specification supersedes the obsolete DEXRON® III in GM vehicles.)
http://www.amsoil.com/StoreFront/atl.aspx?zo=1181889 .
Kinematic Viscosity @ 100°C, cSt (ASTM D-445) 6.0
Kinematic Viscosity @ 40°C, cSt (ASTM D-445) 29.8
Viscosity Index (ASTM D-2270) 153
Flash Point °C (°F) (ASTM D-92) 226 (439)
Fire Point °C (°F) (ASTM D-92) 244 (471)
Pour Point °C (°F) (ASTM D-97) -53 (-63)

All available at wholesale prices. Just contact me.

Aren't these just the specs of the Amsoil products?

I think the question is on what the minimum requirements are for the specs, not what those values are of the Amsoil products.

This is more looking like a sales talk now...anyone can google these productsheet details.

It was unclear to me as to what "specification of General Motors - Denison II, III & IV for Automatic Transmission Fluid. Could somebody help me to get this specification? Visc 100, 40, VI, FP and PP are enough." meant. There are specs for Denison HF-0, HF-1, HF-1A, HF-2, HF-2A and for Dexron II, III and VI. So I gave examples of those products and the typical properties he listed to hopefully get the original poster to clarify what exactly he is looking for.

Dear Tim Vipond,
Please accept my applogy for the confusion. I wrongly entered as Denison instead of Dexron. General Motors specification for ATF comes as Dexron II, III and IV. I am really sorry. Please give your input if you get Dexron spec.

Not a problem. I thought there was some confusion and glad we could clear that up. May I ask why you would like the information you requested?

Because I got a specification for typical values only and we are not able to meet it. If I get minimum and maximum spec, we can try.

Dexron VI has a maximum viscosity of 6.0 cSt at 100C.
Dexron-III has a minimum viscosity of 6.8 cSt at 100C.
I'm not aware of the other specs. You may have to contact GM.

I think this might help with ATF question.


https://forums.noria.com/eve/fo...36604995&m=111106924



Kirk