Diesel engine oil filtering

As for your request, i suggest you can use our NSH oil purification plant, Sino-NSH Oil Purifier Manufacture Co., Ltd is a high-tech Company which is engaged in researching, developing and manufacturing lubrication purification equipment. Its parent company, Sino-NSH High-Tech Company, was established in 1992.
Our main products: GER used oil re-refining machine,VFD insulating oil purification system;TF turbine oil filtration equipment; Oil Regeneration Purifier;oil recycle;oil cleaner;oil filtering machine.

If you want to know more information about our products, you can write to me ,my email:

sinonsh523@vip.163.com
sinonsh523@sino-purification.com
86-23-67725736

Jagath,
If you install Klarol Oil Purifier on every engine, you don't need to change oil after every 250 hours. Only you will have to change its filter after every 250 hours. Same oil will run for more than 2000 hours without changing.Everything suits the costeconomy, the life of engine will also increase. You may contact me on prabhakar@klarol.com or call me at 91-9431177036

quote:

Originally posted by Jagath:
...We replace approx. engine oil in every 250 hr. operation. Monthly oil consumption is about 500 lt.s...

No need for doing it! Synthetic motor oil, by-pass filtration, good oil filters (Donaldson Endurance) changed at "double the time", good air filters (Donaldson Endurance) if air quality is disputable and Used Oil Analysis will allow you to use oil much, much longer. UAO results will, without mistake, tell you when it is enough!

Mr.Jagath,

Why don't you try an oil analysis program.If you are participating in an oil analysis program,you can monitor the engine oil as well as engine and accordingly extend such drain out periods.There are some labs in India doing these things.I think I can help you in this regard.

My Email address is nnkrishnakumar_menon@rediffmail.com

Dear Krishnakumar Menon,

Thank you very much for your reply. It would be a great help to me if you could tell me wghat are the important test parameters as well are the limits to reject the oil.

Jagath.

All the physico chemical parameters,Soot and wear metal analysis are important for diesel engines.

The limits depends on the engine manufacturer.

Please give me your Email address.I will put it in the mail.

Dear Krishnakumar,

My email address is jw@haycarb.com.

Jagath.