Hi,
Does anyone have a list of fire resistant fluids stating there factory mutual class rating i.e Polyol ester-Factory Mutual Class 1 fluids. I am look specifically for water glycol and polyether polyol.
tx
Original Post
Read our primer articles on Grease Guns and Oil Sight Glasses.
Replies sorted oldest to newest
Hello, Bill.
I hope this can help you:
Look for the search feature in the homepage of most lubricant makers, and type "factory mutual" then you should receive a couple results with the products you are looking for, i do remember N Y V A C in the m 0 b i 1 catalogue and 1 R U S in the s h e l l catalogue, i am sure you will find the other products in the other homepages.
I hope this can help you:
Look for the search feature in the homepage of most lubricant makers, and type "factory mutual" then you should receive a couple results with the products you are looking for, i do remember N Y V A C in the m 0 b i 1 catalogue and 1 R U S in the s h e l l catalogue, i am sure you will find the other products in the other homepages.
thanks Ariel i will give that a try. 
Hi Bill,
Look into Chvron Product range they have products like FRHF 46, water glycol based product
Look into Chvron Product range they have products like FRHF 46, water glycol based product
Bill74
Send me your email address and I'll send you the relevant pages from January 2007 FM Approval Guide.
Frank
Send me your email address and I'll send you the relevant pages from January 2007 FM Approval Guide.
Frank
Thanks..my email is william_carver@dofasco.ca
William,
Have sent you info on polyether polyol (PAG) fluid called Ecosafe FR. It has this info in the write up.
Have sent you info on polyether polyol (PAG) fluid called Ecosafe FR. It has this info in the write up.
Dear Bill
Polyol Ester is latest Development . it dont have water so it will give you high Pimp Life.
It is also Approved by Factory Mutual.
It has very high Viscosty Index so it will do,nt giove you Pressure drop problem at High temp areas.
Plz mail me your Equipment details at rrsdelhi@gmail.com
Polyol Ester is latest Development . it dont have water so it will give you high Pimp Life.
It is also Approved by Factory Mutual.
It has very high Viscosty Index so it will do,nt giove you Pressure drop problem at High temp areas.
Plz mail me your Equipment details at rrsdelhi@gmail.com
Polyol Ester has been out since 1970's it is nothing new. It is hydrolytically unstabil and in many systems have created sludge and varnish which we all no is bad for your servos. This reaction has shut down plenty hydraulic units out the in the industry.
i agree, polyol ester is old technology....polyether polyol is the new wave of the future...polyol ester varnishes alot and is subject to hydrolysis.