Hi, Can anyone explain what the difference between oils that are given a foam sequence 1 rating of 10/0 and 20/0 respectively
Original Post
Read our primer articles on Grease Guns and Oil Sight Glasses.
Hughsogh
The foam characteristic test is resulting in [T]/[S]
[T]: The tendency of the tested oil to develop foam under a certain test condition. The developed foam is measured in mL.
[S]: The stability of the developed foam, or it means how good the oil is breaking the foam. After a certain period of time, the developed foam is checked. 0 means the developed foam is released completely.
In your case, the 2nd oil is higher in foam tendency, but both are still having good ability to break the foam.
Regards,
The foam characteristic test is resulting in [T]/[S]
[T]: The tendency of the tested oil to develop foam under a certain test condition. The developed foam is measured in mL.
[S]: The stability of the developed foam, or it means how good the oil is breaking the foam. After a certain period of time, the developed foam is checked. 0 means the developed foam is released completely.
In your case, the 2nd oil is higher in foam tendency, but both are still having good ability to break the foam.
Regards,