Food Grade Chain Lubricant Migration

kentuckyMember

Any ideas on how to keep a food grade chain lubricant from migrating off a low speed 180-2 Drives chain used for a water mist spiral cooler?

Previous attempts at "tacky" oil didn't help. All it did was make the cooler cage and the "product" tacky.

Will a pulse sprayer or drip applicator help?

8/10/068:13 AM

❤️ 0

Original Post

Replies sorted oldest to newest

bruce381Member

drip or wick oiler or a grease or if not grease go to a high vis oil >220 or so with a tackifier.
bruce

8/10/062:45 PM

❤️ 0

amitMember

hi, you may use rocol a non drip formulation specially for over head chain & conveyors
this is extremly good with load carrying
capacity with wide opreating temperature range
for details log on rocol .com

9/25/064:42 AM

❤️ 0

micbialMember

You didn't mention what the requirements were for the lubricant. Does it need to be a H1 (Lubricants with incidental contact) or H2 (Lubricants with no contact)? How is it applied? Oil bath, mist application, drip application or manual application? Texas Refinery Corp. makes a good USDA rated H2 moly chain oil called SURESTA Moly Chain Oil and is a excellent chain lubricant with great "sticking" power.

Also, have you considered a dry film lubricant? It would completly remove any possibility of oil dripping. .

9/30/063:40 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...