Skip to main content

Read our primer articles on Grease Guns and Oil Sight Glasses.

I work with a Dominion made Minton Pulp Dryer that is under 18" of vacuum. A number of years ago the dryer can bearings were switched over to Chevron Ultiplex Synthetic grease and later to Mobil Mobilith SHC PM from Chevron Clarity 220 oil. The reason for changing to grease was because the Oil was being pulled into the machine and contaminating the Product Sheet. We now appear to be having a problem with the oil seperating prematurely from the soap and leaving a hard crust where the grease once was. My question is does anyone have any experience with grease under these kinds of conditions and is there a grease that can handle this job.
Original Post

Replies sorted oldest to newest

G'day Ken,

The difficulty is as you most likely know the vacuum lowers the boiling point of the greases base oil allowing the lighter ends to vapourise off leaving the heavier fractions and the grease thickener as you have seen,
For a grease to cope with these conditions the base oil must have the highest boiling point possible and that leads us to polyflouroethers for base oils.
Typically most of the polyflouroethers are thickened with Teflon as the two will slide together into a homogeneous fluid of the NLGI rating required varied by the ratio of thickner to base fluid.
We are not that satisfied by the teflon thickened greases as the fluorene part of the teflon often cause heavy corrosion,
there is one manufacturer in Australia that thickens with a proprietary system
(J&M Speacialized Products PL,
This system has a backup in the thickner that is if the base oil vaporises over time the thickner will not allow metal to metal contact and that system may prove to be very suitable for your application,
our lab web site has a wall chart of his products ,
www.rttech.com.au,
please feel free to check out, he also has extremely good knowledge and advice in these areas.

Regards Rob S
I know a product that will stop your oil searching for your vehicle. Have you heard about Pertua Pertua? If not, let me tell you a bit about them.

PERTUA PERTUA is a dynamic and innovative company established in 1988 to provide a scientific breakthrough in lubrication technology which offers numerous significant economic benefits and advantages. Its flagship invention, Pertua Oil and Metal Treatment is patented both in the U.S and in the Philippines.

In the year 2000, more than a decade later, PERTUA’s portfolio of lubricant products continuous to evolve to meet the needs of the customers and distributors thus APEX EXELLO & other Pertua derivative products were born.

PERTUA therefore, has spent more than two decades developing a global reach, with millions of satisfied customers and both in the USA and Philippines.

With its long established distribution method of retail and industrial marketing, PERTUA was able to penetrate not only the geographical borders of the Philippines, but also braved to market the product in the United States.

While the company’s global presence continues to grow, PERTUA is actively localizing companies in various markets to meet the growing demand in the different parts of the globe.

For more information and what engine oils you need for your vehicle, visit them at http://pertua.com http://pertua.com
Post
×
×
×
×
Link copied to your clipboard.
×