ISO 17025:2005 Quality Standard and Oil Lab

Read our primer articles on Oil Analysis and Tribology

Hi all,

Are there many oil labs with the ISO 17025 (competence of testing and calibration labs) rating?

Would you suggest our lab takes this route? Any arguments for or against?

One negative point I have picked up is that you cannot simply redo a particular result (e.g. ICP results) if say you noted the ICP/SPECM was reading Zn at slightly higher levels than normal. A new sample number has to be generated.

Any thoughts on the rating?

regards

11/7/064:32 AM

❤️ 0

Original Post

Replies sorted oldest to newest

aaron_123Level 1 - 1 to 50 posts

Abstract. ISO/IEC 17025:2005 specifies the general requirements for the competence to carry out tests and/or calibrations, including sampling. It covers testing and calibration performed using standard methods, non-standard methods, and laboratory-developed methods.

iso certifying body in the philippines

7/24/203:39 AM

❤️ 0

chongyeowLevel 1 - 1 to 50 posts

ISO 17025 is the first internationally accepted standard for laboratory ... A simple way to understand and practice the clauses covered by ISO 17025:2005 ... Clause 4.6-Purchasing, Services and Supplies-Quality of inputs decides the outputs ... Thank you for the useful article, I work as Lab Coordinator in Oil .

web development agency malaysia

10/27/2011:00 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...