On-line and in-line oil monitoring instruments

Try Hyac lazer particle counters and Hydac water content sensors.

Frank

Their is a post half way down this page discussing online particel counters that may be of use, https://forums.noria.com/eve/forums/a/tpc/f/136604995/m/9821014701

This message is to Durate
see water detection by Laser Physics ltd in atlanta GA 706 6934168
We use Fiber optic on-line monitoring in ppm of water and are working on a sulfer ppm laser system 98% finshed. will be comming soon in the spring of 2006.
no-contact no electricty at pipe line can go 2km of fiber for probe!

PRODUCTS THAT WE MANUFACTURE AND DEVELOPE ARE.
WATER DETECTION SYSTEMS :
FIBER-0PTIC REMOTE LASER INDUCED FLUORESCENCE SYSTEMS FOR PIPE LINE PETROLEUM CO.:
Dye detection on-line for Marker dye in ppm with set point for plc's
SPECTROPHOTOMETER SYSTEMS:
ENVIRONMENTAL CONTROL FOR PETROLEUM:
LASER GUIDANCE SYSTEMS:
UNDER-WATER LASER LIDAR:
UNDERWATER MINE DETECTION:
LASERS:
LASER SYSTEMS:
FIBER OPTICS:
FIBER OPTIC LASER SYSTEMS:
LASER SCANNER AND SOFTWARE:
OPTIC WATTER DETECTION SYSTEMS
FOR PETROLEUM INDUSTRY:


SEE OUR: FIBER OPTIC GRAVITY WAVE DETECTORS


MEASUREMENT IN TANKS, TO LEAK DETECTION AND MORE....

From David Infante
laserphysics@alltel.net
Laser physics LTD Atlanta GA.
Fiber optic water detection systems ETC.

You can use EZ-OilClean products for online test. Please be aware that optical particle counter (OPC) are not very accurate for ON-line test, because the count aditives, and the small airbubles that always are in the oil as dirt.www.globalsupplier.dk

quote:

Originally posted by Duarte:
I am looking for technology to perform in-line and on-line oil analysis monitoring. Anyone knows about it?

I can personally recomend the PIM400 In-line Fluid Cleanliness Monitor.
We had several within a new Papermill site and the system remained operational and reliable.

High humidity, dust and rough handling did not cause this equipment to fail.

have a word with your local PALL Corp. engineer and get them to brief you on the system.

If you're looking for the latest in moisture analyzers, I suggest you drop by the EESiFlo site (http://www.eesiflo.com) site and have a look at our latest EASZ-1 Water in Oil Monitor. Not only does it employ the latest in temperature compensated electronics, it'll accurately measure water from 30 ppm to 65% !

Regards
Mark Hill - EESiFlo Inc.
MarkHill@EESiFlo.US

Please send me information on the easz-1 water in oil monitor. I have had problems with every other type of instrument because of response time and resolution. They all managed to detect some level of saturation but it was too late for us and the compressor shut down from water before we get water alarms. Is there somewhere I can buy these devices in Germany? I need a few next week, we are going to try again

Carl;

Please contact me off-group with your email address (MarkHill@EESiFlo.US) and I'll provide you with technnical literature.

FYI, our last Aerospace client said our EASZ-1 Moisture in Oil sensor is "Very Impressive".

With the excellent service we receive from FedEx, we can send a box full of these tools to you in Germany overnight !

Regrds
Mark Hill - President, EESiFlo, Inc.
MarkHill@EESiFlo.US