Hi all, my name is Bob Steward President of Steward Enterprise Inc. in wisconsin I have been selling my SE-100 grease for over 15 yrs. We are considering making some changes to improve it further.I would like some biased or unbiased thoughts/opinions on its properties, price, quality etc vs other grease competitors.
14ozTube$4.81 35#Pail$162.75 120#Keg$542.40 400#drum$1640
SE-100 grease
NLGI Grade 2
Thickener Type Overbased Calcium Sulfonate Complex
Base Oil Viscosity @ 40°C cSt 220
Oxidation Stability, PSI Loss @ 100 hrs 0
Oxidation Stability, PSI Loss @ 500 hrs 2
Oxidation Stability, PSI Loss @ 1,000 hrs 9
Dropping Point °F 550+F
Worked Penetration, 60 Strokes 265-295
Change after 10,000 Strokes +1
Change after 100,000 Strokes +2
Four Ball EP, Weld Point, kg 620kg
Four Ball EP Load Wear Index 65
Four Ball EP Wear Scar, mm .40mm
Timken OK Load, lbs 65 lbs
Water Washout @ 175°F,wt 3.0
Water Spray Off, % 9.0%
Roll Stability, % .1%
Wheel Bearing Leakage, % 5.0% MAX
Fretting Wear, mg loss <2.5
Corrosion Protection pass
Copper Corrosion pass
Copper Strip Corrosion, 210°F 1A
Oil Separation, 24 hours @ 25°C (77°F), % 0.0
High Temperature Life, hrs 100
Pour Point, °C (°F) -20 (-4)
Flash Point, COC °C (°F) 225 (437)
Original Post
