Skip to main content

Read our primer articles on Vibration Analysis and Laser Alignment Tools.

The design of double row angular contact bearing is similar to two single row angular contact ball bearings placed adjacent. The design is non separable type. The basic design does not have filling slots and can accommodate equal axial loads in both directions.

Double row angular contact ball bearings can be characterized by radial and axial load to bear the load combined to restrict the axis of both axial displacement. And two-way thrust ball bearings, bearing such a high speed limit, for the contact angle 32 °, rigid, affordable overturning moment, is widely used in cars in the front wheel (some models have the same size The double row tapered roller bearings).

Double row angular contact ball bearings installed Caution should be taken when affordable two-way bearing axial loading, but the side of the ball are loaded when the gap should be careful not to let the main axial load through Goubian side of the gap.
Original Post

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×