Skip to main content

Read our primer articles: OEE | RCM | Lean Manufacturing | Kaizen Events | FMEA

Replies sorted oldest to newest

Hi Aerox,
Without further information I would be obtaining the hydraulic system schematic and check for the common supply for the "bucket movement and the right hand side track movement. The slew/swing motor" as there may be an adjustment available to those supply feeds, I would also complete an analysis on the fluid so you're sure the fluid is correct but I would have suspected the fluid would effect all areas,
Regards
Rob S
Post
×
×
×
×
Link copied to your clipboard.
×