Skip to main content

Read our primer articles on High Mileage Oil, Synthetic Oil and Kinematic Viscosity

I work for a company out of Bluffdale, UT. and we manufacture an additive that boasts similar claims to that of zmax, dura lube prolong, and those sort of campanies. We are new and still getting testing results completed, but we have had very positive feedback thus far. What additives are most used and trusted out there by large fleets and why?
Original Post

Replies sorted oldest to newest

I am surprised to see that in today's age of high tech oils with extended drain ratings some really good long lasting synthetic oils, people would still have to resort to additives. If one already pays a high price for the cost of allegedly good oil, why pay extra for an aftermarket additive? Years back, when synthetics werent there or very high priced, I would use regular mineral based oils and add STP Oil Treatmentspecialy while driving in summers. Would keep the oil quite stable but after switching to Mobil-I, I never felt the need for that.
Not to sound like an ingrate, but I don't have the equipment or the time to test an additive rigorously for fun. I can suggest to you how to convince me of its merits:

The timken test that you did comparing it to lucas is interesting, but not horribly impressive alone. It is fairly well accepted that timken tests, and the 4 ball wear scar test show interesting things, but do not necessarily illustrate what will happen to a lubricant in an engine. The tests are in fact much more useful for greases and similar lubes that are not exposed to combustion byproducts and temps. An example of this would be the Teflon based snake oils which perform well on the Timken, and even cut some friction inside the engine, but at the price of greatly increased wear, and a risk of clogged passages and filters.

Obviously, your firm will consider the exact composition of the additive secret, but you could at least tell me what I could learn from getting a standard specro analysis of a virgin sample. Everything that you have to disclose on an MSDS sheet, you might as well tell me also.

I'd be curious as to the effect on the anti-foam characteriestics of the base oil. The link I mentioned earlier may give an idea of how to test that:

http://www.bobistheoilguy.com/images/lucas/lucas.htm


Obviously, you also need to check for how your additive alters the other physical properties of the base oil: Cold Cranking Simulator, Flash Point, TBN, TAN, viscosity, etc.


Finally, if it checks off on all of those, you need to run a controled test, preferably thrid party via a university or similar on test engines. Even a series of Briggs lawnmower engines will be a start, but in the big picture, you'll need to test across an statistically significant number of cars or trucks in the same driving conditions, such as Taxi cabs, rental cars, etc. To be convincing to hard core skeptics like me, you should ideally have the tests done by a third party. At the minimum, they need to be double blind tests where neither the mechanic nor the drivers know which cars are recieving the additive. (You'd have to premix the oil for this).


Finally, if you have any questions, ask them! I eagerly await more information from you.
Alaco,

Many thanks for your offer, I have heard a lot of good things about the Lucas additive but unfortunately the Lucas dealers out here in India have no idea about this. I would love to try out your product as well as try and market it here. If you can send me the details by mail on cost as well as a spec chart, I would be much obliged. Since you claim that your product is better than Lucas, I am really intersted now.
Tim,

Having sold Castrol Industrial lubes in India for over 17 years I feel selling additives is the a much tougher job and you have lot of work ahead of you.

From what I know, Lubrizol, Ethyl, Infenium are the top Engine oil additives in use in India and I am sure they would be among the top five in US as well. The main choice is brand; service and price thereafter.

As far as introducing new additives are concerned I would like to share my experience of the 90's. Castrol Marine introduced a new range of oils for use on auxilary engines on board and on land for use on Diesel Generating sets. Wartsila ( in India) one of the leading marine engine manufacturers made a racket; and demanded a complete set of performance tests and 10,000 hrs plus endurance tests prior to use by its customers. Fortunately Castrol had been doing series of test worldwide prior to its launch and was able to support its claims.

The fact of the matter that many OEM's "delist the approval" if there is a change of blend or formulations in the "approved" lube oil.

Tim, if I were a quality conscious Technical/QC manager of a Lube company I would not accept your samples. I would ask you to conduct and pay for the series of performance test (like various API - CF4 tests in toto.) and simultanously run endurance tests. All this would take months and months and only after satisfactory performance would I agree to use your product. There would also be another little test of compatibility with other additive pcakages in the "formulation." After all this, I may still have to seek re-approval from (say GM) for the (say CF4 Engine oil.)

On the other hand, smaller and growing companies may take the challenge and use a newer product at face value. That then, should be your target. And after establishing yourself, you can approach the bigger brands.

Hussam Adeni
Hussam,

Are you happy with the quality of Castrol oils in the recent past. My last experience was with their RX Plus Turbomax and it was not a really good one. The oil thinned out in under 3000Km and had to be changed. I also read about an impending case with Castrol India and Chandigarh Trasnport, CTU alleged that Castrol India send them re-cycled oils which detiorated when used and casued premature engine failiures in their buses.
Interesting. Thanks for the MSDS sheet, and the other information. I eagerly await test resaults and more data.

The fact that it doesn't contain any ptfe is extremely good. Same, I suppose goes for Moly, as adding high levels of moly only seems useful for extending drain intervals, normal levels protect at normal intervals as well, or better than high treat rates do.

To speculate about your product, I hope that is isn't a chlorinated pariffin, which is about the only typical snake oil approach that you haven't eliminated. chlorinated pariffin can turn in incredible timken and 4-ball wear tests, but turn very corrosive when exposed to moisture and combustion by-products. They also attack the ZDDP additives in good oils.

So...is your additive a chlorinated paraffin?

Best case, since we know that your additve isn't a metal, I'd guess that it could be an organic ester of some type.
I should add that there are MAY be some long chain chlorinated compounds that are stable. AFAIK, all of them that have been commonly added to engine oils as snake oil additves have not been.

A classic example would be zMax's additive that in FTC testing doubled bearing corrosion!

So, it is possible that your product has chlorinated compounds and doesn't cause corrisive damage, or chemically fight the additive package of the existing motor oil.

But if you are using a chlorinated coumpund, of any type, no matter how good your anti-corrosion chemistry, you'll want to heavily test for corrosion...and seal compatibility.
From the MSDS:

"Specific Gravity: 1.35 @ 50° /25° C"

= Chlorinated hydrocarbon product. Been there, done that. Don't like the results. Snake oil.

If the additive is too stable it will not be a good EP agent since the chlorine needs to chemically react with the iron surface to work its magic. If it is a good EP agent, then it is too unstable as far as corrosion. Classic catch 22 for this type of additive.
Ok, just to make sure, is the compound halogenated, or chlorinated not technically a parrafin? One or another of the existing snake oils trys to claim they're better than the Chlorinated Parrafins, while they use, I think, chlorinated alpha-olefin, though there are quite a few other halogenated or chlorinated Ep additives.
I see no reason to play with the chemistry of good oils. There is so much written in SAE papers for the testing of the oils for CH-4 and CI-4 that I don't think we are qualified to try to mix anything.
That having been said, there are three types of additives I use or recommend:
Fuel: We have lousy fuel. I use Techron every 5,000 km in my gasoline vehicles and a Diesel Additive in every tank of diesel
Cleaner: I use a product similar to AutoRX when the engine is noisy. Eliminates engine noises incredibly. But just once every 80,000 km or so.
Seal Swell: When Automatic Transmissions are acting up or leaking, power steering leaks, differential leaks.
widman,
Additives modify certain fluid conditions, do not solve mechanical problems.
Yes I also use one inyector cleaner additive every other fuel tank in my gasoline car. However if my Automatic Transmission leaks, I buy a new gasket. AT additives deform the gasket size afecting the gasket basic chemistry. Bigger gasket means no leak? wrong, this is an ongoing process, you will have a leak soon. If your AT is not performing well, make an oil and filter change, by the way and install a new gasket.
Alaco, if your product contains chlorine it will not be met with acceptance. You have so far avoided answering that question, so all we can assume is it does contain halogenated compounds as evidenced by the high density of the product.

Passing a corrosion test does not prove anything other than it passes the corrosion test under the conditions it was run at. If you run the test at a slightly higher temperature it could fail quickly. Carbon - halogen bonds tend to be stable at a certain temperature, but raising the temperature 10 degrees C could result in rapid decomposition and metal attack. Lab tests are useful for comparison between different products, but usually don't reflect real life operating conditions. In many cases these lab tests were developed to explain the mechanism for field failures. The conditions were set to differentiate betweent he problem material and the material that fixed the problem.

Any potential compromise to long term durability will negate any short term benefits from friction modification.
I have been reading all the threads on this subject and I am interested in knowing more. I would like to know what the product that you are discussing. I have been doing some home work on the subject and am amazed what I am finding out. I am impressed with the knowledge here and I want to learn more I too have been introduced to an additive and have been checking it out for over a year now. I have been impressed with the results but still need further research. This subject is open to as much ridicule as is out there. I hve run across simular products such as motorkote, if you can give me more info on this I would appreciate it. Please contact via e-mail provided in profile. I hope to here from you soon
Just a little anecdotal input. I emailed Tom Gooch asking about a clue to the chemistry behind the product and he sent me a brochure and a couple bottles of the product. The literature still did not give much information as to how this stuff works except that it treats the metal and not the oil, with some photos of the wear scars on a four ball test. I suspect it is a boron derivative. I did put some into my vehicle (1999 Olds Bravada) to see if there was any improvement in fuel economy (with gas prices as they are I might try anything). I did not collect alot of data prior to putting the product into my vehicle but I do keep an eye on the current fuel economy on the vehicles computer. I was averaging 16-18 mpg at highway speeds 75-80 mph in North Dakota and now after over 300 miles with the product in the engine the computer shows 18-19 mpg. At 60 mph I am showing 23-24 mpg. Not a great improvement but not insignificant either, 5% isnt bad. Just my observations and by no means a scientific test.
Back when the MSDS was posted, Alaco specifically said that it doesn't contain metallic antiwear additives. I tool that to include Boron based stuff, as well as the various others like ZDDP, Ca, Mg, etc.

Boron additives definitely do work...BUT there is a relatively small range of concentrations that are effective...so the trap here might be if you add too much to a high Boron level oil (Mobil 1) you may go out of the top end of the range.
Tim i'm so glad you asked that question. SFR corporation is the best additive company on the market right now. They used to use chlorine in their technology and had really good results with the products. As technology changes so does oil and SFR has been right on top of it. The new chemical composition is proprietary information, but i can tell you this its a metalalic substance that is not like any used before its NOT MOLY OR COPPER OR ZINC or any of that kind. The thing of it is its as powerful as lead use to be only more so. In some of the newer Transmission testing done with the boron and this product the boron failed against it.

You can check them out www.sfrcorp.com
Abus your only partially right your right SFR does contain a PAO base but thats only the carrier for the actual additive which is bismuth based and wipes boron up and down. Your right anyone can by synthetic base stock and call it the greatest synthetic out there but trust me there is far more in the product then just a PAO. Call them up they explain it too you.
I'm still waiting for a reply from SFR, but their MSDS sheets and website only list PAO + 5% ester in their engine oil additive. Although I hope they do respond to me, I would point out that having an additive company explain an additive to you isn't exactly a neutral explaination...have you ever talked to the PTFE or Chlorinated Pariffin companies?
CharlieB "Fact is, if an additive is used and it changes the chemistry of an API approved oil(and it will), you will void the engine warranty"

This is protected under the federal Goverment. A manufacture must prove beyond a reasonable doubt that any aftermarket part that is installed on a vehicle was the root cause of the failure. It doesn't matter if its api or any other kind of oil as long as it meets the oem's specifications you will not cause any harm. If you read the owners manual they say we do not recommend the use of oil or fuel additives. Keyword is recommend nowhere in any vehicle that i've owned does it say adding any supplements or additives to fuel or oil read using these products WILL VOID YOUR warranty. And you will win in a court of law a suit if this subject was to arise.

If you use anything with the words racing on it now that is a technicallity that they can get off the hook from. Which SFR nor many others have. In fact SFR has their own warranty that extends the original OEM and in the fine print its cleary read racing offroad and abuse is not covered.

Let me ask you this CharlieB What is a better oil. Define what a better oil is after the smoke clears additives are the only thing you'll have to fall back on because the only things that have made any improvements to oil is the advancement of synthetics from Dino oils and ADDITIVES.

If the OEM's had it their way it would say use ford oil or nissan oil. They make cars not oil leave that to others. They depend on others to make their vehicles just like oil people depend on additive people. Their are some giants out there that make their own like Texaco, Cheveron, Exxon. But even they look to the additive people.

STP made zddp the oil guys hated at first now you find it in almost all Aftermarket oils QS,mobil etc.

I think the biggest things with additives is the lack of knowledge and education most people haven't tried them. Those that have and think they have an opinion haven't tried enough of them.
No but Valvolines Synthetic 15 ounce bottle at a treat rate of 1 ounce per quart lowers Fe and lead time after time through analysis from what I've seen . It's cost efficient with 3 treats per bottle .

There's a couple additives out there promoted to reduce oxidation . Even with the best synthetics . I personally cannot see why someone using a good "real" synthetic with exeptionaly low NOACK would place a additive like these in there oil, with their probable very low NOACK . Whats the NOACK of solvents ? See what I mean ?

If I were having trouble with oxidative thickening I'd switch oils but I don't , so I wont't Razz

Anyway , when was the last time you saw a GFIII mineral based oil thicken out of grade ?
the best additive available for engine oil and non-ep industrial oils is MONOLEC. it is not for sale by itself but is an additive of Lubrication Engineers, Inc. go to their website www.le-inc.com and look up PRODUCTS, look up 8800(15-w-40), look up customer feedbacks,click on the first one then feel free to look around at some more but the first one pretty much sums it all up.if you are buying a quality oil why would you feel the need to add to it?
Hi All,

I have used Xado products on both of my cars and with great results. The engine runs much smoother and also found noticeable fuel efficiency.
The essence of XADO technology is the discovery of the process REVITALIZATION which changed the ordinary approach to repair and gave new opportunities in operation of machines and different mechanisms.
Here are a couple of links which help you:
Xado products
Xado FAQ
The FAQ also has a video describing how Xado works.
Thanks
If your using a high quality lubricant to start with then you shouldn't have to add a "after market" additive to it. Unless your a tribologist and understand oil formulations leave the blending to the experts. Millions are spent in perfecting the perfect lubricant only to have someone come along and dump in a can or bottle of some mystery fairy dust thinking they can do better in their back yard chemistry experiment.
I work for a company out of Bluffdale, UT. and we manufacture an additive that boasts similar claims to that of zmax, dura lube prolong, and those sort of campanies. We are new and still getting testing results completed, but we have had very positive feedback thus far. What additives are most used and trusted out there by large fleets and why?

Well to answer your question in my opinion more and more people are becoming less trusting in oil additives. Mainly because of all the fraud products out there. Now I am not saying all people think this way but its starting to become more and more. There are three things I think people should look for and you as a company should do.

1. Make sure the product has had testing done and shows positive results. (There is no harmful effects to the engine in the long term)

2. That the product has documentation

3. The product has been SEO approved. Yes I know its expensive to have done but, that is what truckers look for. Because only a small amount of products that go through the testing unless they work pass.

If you go to http://www.oiladditive.tagzap.org they give you tips on using an oil additive what to look for, how you can benefit from it, etc. The product that they recommend has all 3 of these qualifications.
Hope that helps! good luck with everything
In my opinion, the very best oil additive (or friction reducer) is Tufoil.

I'm sure you've all heard of it. It's been around for like 23 years or more.

Tufoil holds the Guinness World Record for the slickest substance on the planet.

It's also one of the most durable additives you can buy, too. Other products tend to burn up at around five minutes on the four-ball wear test machine thingy, and the Tufoil lasted 16 days.

But it's not for everyone. It didn't do well in my Volvo XC70 turbo wagon. It was so slick that my engine would fly into the red as I was trying to get into traffic on the freeway with the turbo fully spooled up. I kind of think that revealed a weakness in my auto tranny, but I took it out anyway. Unsafe in my Volvo.

It works wonders in manual trannies and diffs. It's like taking 500 lbs out of your trunk by dosing all of your gear oils.

You can get it at Pep Boys for around $15.

Tufoil
Post
attend Reliable Plant 2024
×
×
×
×
Link copied to your clipboard.
×